[ntp:hackers] u-blox reference clock driver

[Achim Gratz]

Udo van den Heuvel via devel writes:
> On 13-08-18 22:10, Gary E. Miller via devel wrote:
> Found an LEA-M8T at https://www.csgshop.com/product.php?id_product=200
> but this one has TIME1 and TIME2 besides power and RX/TX pairs.

You've probably found it out by now, but this one has the two TIMPULSE
_outputs_ broken out, but not the EXTINT _inputs_.  They're probably not
too terribly hard to get at, but that means soldering some flying wires
to the board.

If you have a GPS antenna with SMA connector then you'll want this
module instead:

https://www.csgshop.com/product.php?id_product=240

…plus perhaps the companion USB interface for getting the configuration
started with some PC more easily:

http://www.csgshop.com/product.php?id_product=239

If you rather use a GPS antenna with U.FL connector then these two would
work:

http://www.csgshop.com/product.php?id_product=198
http://www.csgshop.com/product.php?id_product=244



Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

Wavetables for the Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#BlofeldUserWavetables