More desk clutter... :-)

[Achim Gratz]

Achim Gratz writes:
> I've configured two NavSpark mini to go into the two boxen.  I can just
> fit them in, so they won't be outside anymore like on the Pi 2B.  The
> cases I bought don't have any way to get some cables out, but the
> shrouds on the USB ports leave an opening just wide enough to get the
> antenna through.

Well, the navSpark mini didn't quite like being in the box and dropped
the ball quite often.  I've routed the cable out through the oening for
the HDMI port and built some contraption to put the GPS antenna on even
further away from the Pi.  Seems to work better now, got a good 3D fix
within a minute and holding it as far as I can tell.

> The Pi3 now hangs off my router and will be left alone for at least a
> week to see what it's up to.  I will then start to thermalize it,
> depending on where the zero-TC point is going to be.  From the little
> data I already have it looks like it should have very similar parameters
> as the Pi2.

Since I've had to disturb it anyway to get the GPS out (and I've managed
to crash it while doing this unfortunately), I started an sha512sum on
one core and disabled the HDMI.  With some luck that should be right
around the zero-TC point for most of the day based on the data from the
last 28 hours.


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

Factory and User Sound Singles for Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#WaldorfSounds