Draft Stratum 1 Microserver HOWTO is up

[Frank Nicholas]

> On May 20, 2016, at 10:10 AM, Eric S. Raymond <esr at thyrsus.com> wrote:
> 
> I now have, at
> 
> http://www.catb.org/esr/faqs/stratum-1-microserver-howto/

Regarding `clockmaker`, the following line should be changed:
dtoverlay=pi3-miniuart-bt-overlay

Should be changed to:
dtoverlay=pi3-miniuart-bt

From this engineering post/warning, including “-bt-overlay” will likely fail in the future:
https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732 <https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732>

I just looked at the firmware in the lite image (2016-05-10) , and NONE of the overlays now have “-overlay” in their file name.  If any lines in “/boot/config.txt” still include “-overlay”, then they will fail to load.

Thanks,
Frank
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ntpsec.org/pipermail/devel/attachments/20160520/cb073f14/attachment.html>