Draft Stratum 1 Microserver HOWTO is up

[Frank Nicholas]

> On May 20, 2016, at 2:39 PM, Eric S. Raymond <esr at thyrsus.com> wrote:
> 
> Anthony Stirk <upuaut at gmail.com>:
>> Will respond more later but serial port thing fixed here :
>> 
>> https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=148515
> 
> I attempted to follow one set of those directions. Specifically,
> I changed /boot/config.txt so enable_uart=1 and disabled auto because
> the enable for it was on the line above rthat - seems like they might
> have both been put there by raspi-config.
> 
> That looked like it ought to work, But it didn't.  Sigh.
> 
> If anyone has a /boot/config.txt and /boot/cmdline.txt that makes
> the GPS visible under 2016-05-10-raspbian-jessie-lite, I'd love to see it.

Please see this page:
https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=141195

It explains the change in UART behavior & what the options are used for.  “enable_uart=1”  is used if you want a UART **console** on boot-up.  I suspect this would prevent the use of the UART for other purposes (GPS hat).

I’m working on a good set of boot options now.

Thanks,
Frank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ntpsec.org/pipermail/devel/attachments/20160520/8f86a2ee/attachment.html>