[Git][NTPsec/ntpsec][ntp.util-codacy] Codacy: Add unclean fixes.
James Browning
gitlab at mg.gitlab.com
Mon Sep 14 09:06:11 UTC 2020
James Browning pushed to branch ntp.util-codacy at NTPsec / ntpsec
Commits:
663353b3 by James Browning at 2020-09-11T12:18:51-07:00
Codacy: Add unclean fixes.
- - - - -
13 changed files:
- ntpclients/ntploggps.py
- ntpclients/ntplogtemp.py
- ntpclients/ntpq.py
- ntpclients/ntpviz.py
- pylib/agentx.py
- pylib/agentx_packet.py
- pylib/packet.py
- pylib/statfiles.py
- pylib/util.py
- tests/pylib/test_ntpc.py
- wafhelpers/asciidoc.py
- wafhelpers/check_sizeof.py
- wafhelpers/options.py
Changes:
=====================================
ntpclients/ntploggps.py
=====================================
@@ -46,9 +46,11 @@ except ImportError as e:
class logfile_header_class(logging.handlers.TimedRotatingFileHandler):
- 'A class to modify the file logging handler.'
+
+ """A class to modify the file logging handler."""
+
def doRollover(self):
- 'function to add header to new file on rotation.'
+ """Add header to new file on rotation."""
if str is bytes:
super(logfile_header_class, self).doRollover()
else:
@@ -57,7 +59,7 @@ class logfile_header_class(logging.handlers.TimedRotatingFileHandler):
def logging_setup():
- "Create logging object"
+ """Create logging object."""
logFormat = logging.Formatter('%(message)s')
# Create logger for gpsd
Logger = logging.getLogger()
@@ -170,7 +172,7 @@ class GpsPoller(threading.Thread):
@property
def time(self):
- "Return the gpsd time fix"
+ """Return the gpsd time fix."""
t = self.gpsd.fix.time
if isinstance(t, int):
return t
=====================================
ntpclients/ntplogtemp.py
=====================================
@@ -33,9 +33,10 @@ import time
class logfile_header_class(logging.handlers.TimedRotatingFileHandler):
- 'A class to modify the file logging handler.'
+
+ """A class to modify the file logging handler."""
def doRollover(self):
- 'function to add header to new file on rotation.'
+ """Add header to new file on rotation."""
if str is bytes:
super(logfile_header_class, self).doRollover()
else:
@@ -44,11 +45,7 @@ class logfile_header_class(logging.handlers.TimedRotatingFileHandler):
def run_binary(cmd):
- """\
-Run a binary
-Return output if good, None if bad
-"""
-
+ """Run a binary Return output if good, None if bad."""
try:
# sadly subprocess.check_output() is not in Python 2.6
# so use Popen()
@@ -72,7 +69,8 @@ Return output if good, None if bad
class CpuTemp:
- "Sensors on the CPU Core"
+
+ """Sensors on the CPU Core."""
has_sensors = False
def __init__(self):
@@ -85,7 +83,7 @@ class CpuTemp:
self._pattern = re.compile('^\s+temp\d+_input:\s+([\d\.]+).*$')
def get_data(self):
- "Collects the data and return the output as an array"
+ """Collects the data and return the output as an array."""
if not self.has_sensors:
return None
@@ -113,7 +111,8 @@ class CpuTemp:
class SmartCtl:
- "Sensor on the Hard Drive"
+
+ """Sensor on the Hard Drive."""
_drives = []
has_smartctl = False
@@ -129,7 +128,7 @@ class SmartCtl:
self._drives = sorted(self._drives)
def get_data(self):
- "Collects the data and return the output as an array"
+ """Collects the data and return the output as an array."""
if not self.has_smartctl:
return None
@@ -150,13 +149,13 @@ class SmartCtl:
class Temper:
- """\
- Reads 'temper-poll -c' for room temperature data.
+
+ """Reads 'temper-poll -c' for room temperature data.
Before you can use this class you must have a TEMPer USB thermometer
- plugged in, and the temper-python package must be installed and configured.
- See their documentation for that procedure.
-"""
+ plugged in, and the temper-python package must be installed and
+ configured. See their documentation for that procedure.
+ """
has_temper = False
def __init__(self):
@@ -166,7 +165,7 @@ class Temper:
self.has_temper = True
def get_data(self):
- "Collects the data and return the output as an array"
+ """Collects the data and return the output as an array."""
if not self.has_temper:
return None
@@ -194,8 +193,8 @@ class Temper:
class ZoneTemp:
- "Zone sensors"
+ """Zone sensors."""
def __init__(self):
base_dir = '/sys/class/thermal/thermal_zone?/'
self.zones = []
@@ -203,7 +202,7 @@ class ZoneTemp:
self.zones.append(child)
def get_data(self):
- "Collects the data and return the output as an array"
+ """Collects the data and return the output as an array."""
_zone = 0
_data = []
for zone in self.zones:
@@ -249,7 +248,7 @@ args = parser.parse_args()
def logging_setup():
- "Create logging object"
+ """Create logging object."""
logFormat = logging.Formatter('%(message)s')
# Create logger for cpuTemp
tempLogger = logging.getLogger()
@@ -275,14 +274,14 @@ def logging_setup():
def logData(log, data):
- "log the data"
+ """Log the data."""
if data is not None:
for _item in data:
log.info(_item)
def log_data():
- "Write all temperature readings to one file"
+ """Write all temperature readings to one file."""
# Create objects
cpu = CpuTemp()
zone = ZoneTemp()
=====================================
ntpclients/ntpq.py
=====================================
@@ -56,8 +56,8 @@ NTP_FLOAT = 0xa # Float value
class Ntpq(cmd.Cmd):
- "ntpq command interpreter"
+ """Ntpq command interpreter."""
def __init__(self, session):
cmd.Cmd.__init__(self)
self.session = session
@@ -91,7 +91,7 @@ class Ntpq(cmd.Cmd):
for x in dir(self.__class__)]
def emptyline(self):
- "Called when an empty line is entered in response to the prompt."
+ """Called when an empty line is entered in response to the prompt."""
pass
def precmd(self, line):
@@ -102,7 +102,8 @@ class Ntpq(cmd.Cmd):
return line
def default(self, line):
- "Called on an input line when the command prefix is not recognized."
+ """Called on an input line when the command prefix is not
+ recognized."""
cmd, arg, line = self.parseline(line)
try:
dotext = 'do_'+cmd
@@ -264,7 +265,7 @@ usage: help [ command ]
pass
def __assoc_valid(self, line, required=False):
- "Process a numeric associd or index."
+ """Process a numeric associd or index."""
# FIXME: This does a useless call to __dogetassoc() when associd == 0
# No big deal most of the time. Just a useless packet exchange.
if not line:
@@ -303,7 +304,7 @@ usage: help [ command ]
return associd
def __assoc_range_valid(self, line):
- "Try to get a range of assoc IDs."
+ """Try to get a range of assoc IDs."""
tokens = line.split()
if len(tokens) < 2:
return ()
@@ -316,7 +317,7 @@ usage: help [ command ]
return range(lo, hi+1)
def printvars(self, variables, dtype, quiet):
- "Dump variables in raw (actually, semi-cooked) mode."
+ """Dump variables in raw (actually, semi-cooked) mode."""
if self.rawmode:
if not quiet:
self.say("status=0x%04x,\n" % self.session.rstatus)
@@ -337,7 +338,7 @@ usage: help [ command ]
self.say(text)
def __dolist(self, varlist, associd, op, type, quiet=False):
- "List variables associated with a specified peer."
+ """List variables associated with a specified peer."""
try:
variables = self.session.readvar(associd, varlist, op, raw=True)
except ntp.packet.ControlException as e:
@@ -365,7 +366,7 @@ usage: help [ command ]
# Unexposed helper tables and functions end here
def do_units(self, _unused):
- "toggle unit display"
+ """Toggle unit display."""
self.showunits = not self.showunits
def help_units(self):
@@ -375,12 +376,12 @@ usage: units
""")
def do_EOF(self, _unused):
- "exit ntpq"
+ """Exit ntpq."""
self.say("\n")
return True
def do_timeout(self, line):
- "set the primary receive time out"
+ """Set the primary receive time out."""
if line:
try:
self.session.primary_timeout = int(line)
@@ -395,7 +396,7 @@ usage: timeout [ msec ]
""")
def collect_display(self, associd, variables, decodestatus):
- "Query and display a collection of variables from the system."
+ """Query and display a collection of variables from the system."""
try:
queried = self.session.readvar(associd,
[v[0] for v in variables],
@@ -480,7 +481,7 @@ usage: timeout [ msec ]
self.warn("display interrupted")
def do_delay(self, line):
- "set the delay added to encryption time stamps"
+ """Set the delay added to encryption time stamps."""
if not line:
self.say("delay %d ms\n" % self.auth_delay)
else:
@@ -498,7 +499,7 @@ usage: delay [ msec ]
""")
def do_host(self, line):
- "specify the host whose NTP server we talk to"
+ """Specify the host whose NTP server we talk to."""
if not line:
if self.session.havehost():
self.say("current host is %s\n" % self.session.hostname)
@@ -532,7 +533,7 @@ usage: host [-4|-6] [hostname]
""")
def do_poll(self, line):
- "poll an NTP server in client mode `n' times"
+ """Poll an NTP server in client mode `n' times."""
# And it's not in the C version, so we're off the hook here
self.warn("WARNING: poll not implemented yet")
@@ -543,7 +544,7 @@ usage: poll [n] [verbose]
""")
def do_passwd(self, line):
- "specify a password to use for authenticated requests"
+ """Specify a password to use for authenticated requests."""
try:
self.session.password()
except ntp.packet.ControlException as e:
@@ -558,7 +559,7 @@ usage: passwd []
""")
def do_hostnames(self, line):
- "specify whether hostnames or net numbers are printed"
+ """Specify whether hostnames or net numbers are printed."""
if not line:
pass
elif line == "yes":
@@ -588,7 +589,7 @@ usage: hostnames [yes|no|hostname|hostnum]
""")
def do_debug(self, line):
- "set/change debugging level"
+ """Set/change debugging level."""
if not line:
pass
elif line == "more":
@@ -607,8 +608,10 @@ usage: hostnames [yes|no|hostname|hostnum]
self.say("debug level is %d\n" % self.debug)
def do_logfile(self, line):
- """view/change logfile. \"<stderr>\" will log to stderr
- instead of a file"""
+ """View/change logfile.
+
+ \"<stderr>\" will log to stderr instead of a file
+ """
if not line:
self.say(repr(self.logfp.name) + "\n")
return
@@ -631,7 +634,7 @@ usage: debug [no|more|less|n]
""")
def do_exit(self, line):
- "exit ntpq"
+ """Exit ntpq."""
return True
def help_exit(self):
@@ -648,7 +651,7 @@ usage: quit
""")
def do_keyid(self, line):
- "set keyid to use for authenticated requests"
+ """Set keyid to use for authenticated requests."""
if line:
try:
self.session.keyid = int(line)
@@ -666,7 +669,7 @@ usage: keyid [key#]
""")
def do_version(self, line):
- "print version number"
+ """Print version number."""
self.say(version + "\n")
def help_version(self):
@@ -676,7 +679,7 @@ usage: version
""")
def do_direct(self, line):
- "toggle direct mode output"
+ """Roggle direct mode output."""
self.directmode = not self.directmode
if self.directmode:
self.say("Direct mode is on\n")
@@ -690,7 +693,7 @@ usage: direct
""")
def do_raw(self, line):
- "do raw mode variable output"
+ """Do raw mode variable output."""
self.rawmode = True
self.say("Output set to raw\n")
@@ -701,7 +704,7 @@ usage: raw
""")
def do_cooked(self, line):
- "do cooked mode variable output"
+ """Do cooked mode variable output."""
self.rawmode = False
self.say("Output set to cooked\n")
@@ -712,7 +715,7 @@ usage: cooked
""")
def do_authenticate(self, line):
- "always authenticate requests to this server"
+ """Always authenticate requests to this server."""
if not line:
pass
elif line == "yes":
@@ -733,7 +736,7 @@ usage: authenticate [yes|no]
""")
def do_ntpversion(self, line):
- "set the NTP version number to use for requests"
+ """Set the NTP version number to use for requests."""
if not line:
pass
else:
@@ -757,7 +760,7 @@ usage: ntpversion [version number]
""")
def do_keytype(self, line):
- "set key type to use for authenticated requests"
+ """Set key type to use for authenticated requests."""
if not line:
self.say("Keytype: %s\n" % self.session.keytype)
elif line.upper() in ['AES', 'AES128CMAC']:
@@ -775,7 +778,8 @@ usage: keytype [digest-name]
""")
def do_associations(self, line):
- "print list of association IDs and statuses for the server's peers"
+ """Print list of association IDs and statuses for the server's
+ peers."""
if self.__dogetassoc():
self.__printassoc(showall=True)
@@ -786,7 +790,7 @@ usage: associations
""")
def do_passociations(self, line):
- "print list of associations returned by last associations command"
+ """Print list of associations returned by last associations command."""
self.__printassoc(showall=True)
def help_passociations(self):
@@ -796,7 +800,7 @@ usage: passociations
""")
def do_lassociations(self, line):
- "print list of associations including all client information"
+ """Print list of associations including all client information."""
if self.__dogetassoc():
self.__printassoc(showall=True)
@@ -807,9 +811,8 @@ usage: lassociations
""")
def do_lpassociations(self, line):
- """\
-print last obtained list of associations, including client information
-"""
+ """\ print last obtained list of associations, including client
+ information."""
self.__printassoc(showall=True)
def help_lpassociations(self):
@@ -820,7 +823,7 @@ usage: lpassociations
""")
def do_addvars(self, line):
- "add variables to the variable list or change their values"
+ """Add variables to the variable list or change their values."""
if not line:
self.warn("usage: addvars name[=value][,...]\n")
return
@@ -839,7 +842,7 @@ usage: addvars name[=value][,...]
""")
def do_rmvars(self, line):
- "remove variables from the variable list"
+ """Remove variables from the variable list."""
if not line:
self.warn("usage: rmvars name[,...]\n")
return
@@ -857,7 +860,7 @@ usage: rmvars name[,...]
""")
def do_clearvars(self, line):
- "remove all variables from the variable list"
+ """Remove all variables from the variable list."""
self.uservars.clear()
def help_clearvars(self):
@@ -867,7 +870,7 @@ usage: clearvars
""")
def do_showvars(self, line):
- "print variables on the variable list"
+ """Print variables on the variable list."""
if not self.uservars:
self.say("No variables on list.\n")
for (name, value) in self.uservars.items():
@@ -883,7 +886,7 @@ usage: showvars
""")
def do_readlist(self, line):
- "read the system or peer variables included in the variable list"
+ """Read the system or peer variables included in the variable list."""
associd = self.__assoc_valid(line)
if associd >= 0:
qtype = ntp.ntpc.TYPE_SYS if associd == 0 else ntp.ntpc.TYPE_PEER
@@ -897,7 +900,7 @@ usage: readlist [assocID]
""")
def do_rl(self, line):
- "read the system or peer variables included in the variable list"
+ """Read the system or peer variables included in the variable list."""
self.do_readlist(line)
def help_rl(self):
@@ -907,7 +910,7 @@ usage: rl [assocID]
""")
def do_writelist(self, line):
- "write the system or peer variables included in the variable list"
+ """Write the system or peer variables included in the variable list."""
pass
def help_writelist(self):
@@ -917,7 +920,7 @@ usage: writelist [ assocID ]
""")
def do_readvar(self, line):
- "read system or peer variables"
+ """Read system or peer variables."""
associd = self.__assoc_valid(line)
if associd >= 0:
qtype = ntp.ntpc.TYPE_SYS if associd == 0 else ntp.ntpc.TYPE_PEER
@@ -931,7 +934,7 @@ usage: readvar [assocID] [varname1] [varname2] [varname3]
""")
def do_rv(self, line):
- "read system or peer variables"
+ """Read system or peer variables."""
self.do_readvar(line)
def help_rv(self):
@@ -941,7 +944,7 @@ usage: rv [assocID] [varname1] [varname2] [varname3]
""")
def do_writevar(self, line):
- "write system or peer variables"
+ """Write system or peer variables."""
pass
def help_writevar(self):
@@ -951,7 +954,7 @@ usage: writevar assocID name=value,[...]
""")
def do_mreadlist(self, line):
- "read the peer variables in the variable list for multiple peers"
+ """Read the peer variables in the variable list for multiple peers."""
if not line:
self.warn("usage: mreadlist assocIDlow assocIDhigh\n")
return
@@ -973,7 +976,7 @@ usage: mreadlist assocIDlow assocIDhigh
""")
def do_mrl(self, line):
- "read the peer variables in the variable list for multiple peers"
+ """Read the peer variables in the variable list for multiple peers."""
if not line:
self.warn("usage: mrl assocIDlow assocIDhigh")
return
@@ -986,7 +989,7 @@ usage: mrl assocIDlow assocIDhigh
""")
def do_mreadvar(self, line):
- "read peer variables from multiple peers"
+ """Read peer variables from multiple peers."""
if not line:
self.warn("usage: mreadvar assocIDlow assocIDhigh "
"[ name=value[,...] ]")
@@ -1010,7 +1013,7 @@ usage: mreadvar assocIDlow assocIDhigh [name=value[,...]]
""")
def do_mrv(self, line):
- "read peer variables from multiple peers"
+ """Read peer variables from multiple peers."""
if not line:
self.warn(
"usage: mrv assocIDlow assocIDhigh [name=value[,...]]")
@@ -1024,7 +1027,7 @@ usage: mrv assocIDlow assocIDhigh [name=value[,...]]
""")
def do_clocklist(self, line):
- "read the clock variables included in the variable list"
+ """Read the clock variables included in the variable list."""
assoc = self.__assoc_valid(line)
if assoc >= 0:
self.__dolist(self.uservars.keys(),
@@ -1038,7 +1041,7 @@ usage: clocklist [assocID]
""")
def do_cl(self, line):
- "read the clock variables included in the variable list"
+ """Read the clock variables included in the variable list."""
self.do_clocklist(line)
def help_cl(self):
@@ -1048,7 +1051,7 @@ usage: cl [assocID]
""")
def do_clockvar(self, line):
- "read clock variables"
+ """Read clock variables."""
assoc = self.__assoc_valid(line)
if assoc == 0:
self.warn("This command requires the association ID of a clock.")
@@ -1063,7 +1066,7 @@ usage: clockvar [assocID] [name=value[,...]]
""")
def do_cv(self, line):
- "read clock variables"
+ """Read clock variables."""
self.do_clockvar(line)
def help_cv(self):
@@ -1073,7 +1076,7 @@ usage: cv [ assocID ] [ name=value[,...] ]
""")
def do_pstats(self, line):
- "show statistics for a peer"
+ """Show statistics for a peer."""
pstats = (
("srcadr", "remote host: ", NTP_ADD),
("dstadr", "local address: ", NTP_ADD),
@@ -1105,7 +1108,7 @@ usage: pstats assocID
""")
def do_peers(self, line):
- "obtain and print a list of the server's peers [IP version]"
+ """Obtain and print a list of the server's peers [IP version]"""
self.__dopeers(showall=True, mode="peers")
def help_peers(self):
@@ -1115,9 +1118,8 @@ usage: peers
""")
def do_apeers(self, line):
- """
-obtain and print a list of the server's peers and their assocIDs [IP version]
-"""
+ """Obtain and print a list of the server's peers and their assocIDs [IP
+ version]"""
self.__dopeers(showall=True, mode="apeers")
def help_apeers(self):
@@ -1128,7 +1130,7 @@ usage: apeers
""")
def do_lpeers(self, line):
- "obtain and print a list of all peers and clients [IP version]"
+ """Obtain and print a list of all peers and clients [IP version]"""
self.__dopeers(showall=True, mode="peers")
def help_lpeers(self):
@@ -1138,9 +1140,8 @@ usage: lpeers
""")
def do_opeers(self, line):
- """
-print peer list the old way, with dstadr shown rather than refid [IP version]
-"""
+ """Print peer list the old way, with dstadr shown rather than refid [IP
+ version]"""
self.__dopeers(showall=True, mode="opeers")
def help_opeers(self):
@@ -1151,8 +1152,8 @@ usage: opeers
""")
def do_lopeers(self, line):
- """obtain and print a list of all peers and clients showing
- dstadr [IP version]"""
+ """Obtain and print a list of all peers and clients showing dstadr [IP
+ version]"""
self.__dopeers(showall=True, mode="opeers")
def help_lopeers(self):
@@ -1163,7 +1164,7 @@ usage: lopeers
""")
def do_hot_config(self, line):
- "send a remote configuration command to ntpd"
+ """Send a remote configuration command to ntpd."""
try:
self.session.password()
except ntp.packet.ControlException as e:
@@ -1198,7 +1199,7 @@ usage: config <configuration command line>
""")
def do_config_from_file(self, line):
- "configure ntpd using the configuration filename"
+ """Configure ntpd using the configuration filename."""
try:
with open(line) as rfp:
self.say("%s\n" % self.session.config(rfp.read()))
@@ -1216,8 +1217,11 @@ usage: config_from_file <configuration filename>
self.say(self.formatter.summary(entry) + "\n")
def do_mrulist(self, line):
- """display the list of most recently seen source addresses,
- tags mincount=... resall=0x... resany=0x..."""
+ """Display the list of most recently seen source addresses, tags
+ mincount=...
+
+ resall=0x... resany=0x...
+ """
cmdvars = {}
for item in line.split(" "):
if not item:
@@ -1304,7 +1308,7 @@ usage: mrulist [tag=value] [tag=value] [tag=value] [tag=value]
""")
def do_ifstats(self, line):
- "show statistics for each local address ntpd is using"
+ """Show statistics for each local address ntpd is using."""
try:
self.session.password()
entries = self.session.ifstats()
@@ -1329,7 +1333,7 @@ usage: ifstats
""")
def do_reslist(self, line):
- "show ntpd access control list"
+ """Show ntpd access control list."""
try:
self.session.password()
entries = self.session.reslist()
@@ -1356,7 +1360,7 @@ usage: reslist
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_sysinfo(self, _line):
- "display system summary"
+ """Display system summary."""
sysinfo = (
("peeradr", "system peer: ", NTP_ADP),
("peermode", "system peer mode: ", NTP_MODE),
@@ -1384,7 +1388,7 @@ usage: sysinfo
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_kerninfo(self, _line):
- "display kernel loop and PPS statistics"
+ """Display kernel loop and PPS statistics."""
kerninfo = (
("koffset", "pll offset: ", NTP_FLOAT),
("kfreq", "pll frequency: ", NTP_FLOAT),
@@ -1414,7 +1418,7 @@ usage: kerninfo
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_sysstats(self, _line):
- "display system uptime and packet counts"
+ """Display system uptime and packet counts."""
sysstats = (
("ss_uptime", "uptime: ", NTP_INT),
("ss_reset", "sysstats reset: ", NTP_INT),
@@ -1441,7 +1445,7 @@ usage: sysstats
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_monstats(self, _line):
- "display monitor (mrulist) counters and limits"
+ """Display monitor (mrulist) counters and limits."""
monstats = (
("mru_enabled", "enabled: ", NTP_INT),
("mru_hashslots", "hash slots in use: ", NTP_INT),
@@ -1471,7 +1475,7 @@ usage: monstats
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_authinfo(self, _line):
- "display symmetric authentication counters"
+ """Display symmetric authentication counters."""
authinfo = (
("authreset", "time since reset: ", NTP_INT),
("authkeys", "stored keys: ", NTP_INT),
@@ -1502,7 +1506,7 @@ usage: authinfo
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_ntsinfo(self, _line):
- "display NTS authentication counters"
+ """Display NTS authentication counters."""
ntsinfo = (
("nts_client_send", "NTS client sends: ", NTP_INT),
("nts_client_recv_good", "NTS client recvs good: ", NTP_INT),
@@ -1532,7 +1536,7 @@ usage: ntsinfo
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_iostats(self, _line):
- "display network input and output counters"
+ """Display network input and output counters."""
iostats = (
("iostats_reset", "time since reset: ", NTP_INT),
("total_rbuf", "receive buffers: ", NTP_INT),
@@ -1558,7 +1562,7 @@ usage: iostats
# FIXME: This table should move to ntpd
# so the answers track when ntpd is updated
def do_timerstats(self, line):
- "display interval timer counters"
+ """Display interval timer counters."""
timerstats = (
("timerstats_reset", "time since reset: ", NTP_INT),
("timer_overruns", "timer overruns: ", NTP_INT),
=====================================
ntpclients/ntpviz.py
=====================================
@@ -69,7 +69,7 @@ if sys.version_info[0] == 2:
sys.setdefaultencoding('utf8')
def open(file, mode='r', buffering=-1, encoding=None, errors=None):
- "Redefine open()"
+ """Redefine open()"""
return(codecs.open(filename=file, mode=mode, encoding=encoding,
errors=errors, buffering=buffering))
@@ -103,8 +103,8 @@ refclock_name = {'127.127.20.0': 'NMEA(0)',
# Gack, python before 3.2 has no defined tzinfo for utc...
# define our own
class UTC(datetime.tzinfo):
- """UTC"""
+ """UTC."""
def utcoffset(self, dt):
return datetime.timedelta(0)
@@ -132,10 +132,10 @@ if (3 > sys.version_info[0]) and (7 > sys.version_info[1]):
# overload ArgumentParser
class MyArgumentParser(argparse.ArgumentParser):
- "class to parse arguments"
+ """class to parse arguments."""
def convert_arg_line_to_args(self, arg_line):
- '''Make options file more tolerant'''
+ """Make options file more tolerant."""
# strip out trailing comments
arg_line = re.sub('\s+#.*$', '', arg_line)
@@ -150,7 +150,7 @@ class MyArgumentParser(argparse.ArgumentParser):
def print_profile():
- """called by atexit() on normal exit to print profile data"""
+ """called by atexit() on normal exit to print profile data."""
pr.disable()
pr.print_stats('tottime')
pr.print_stats('cumtime')
@@ -164,8 +164,8 @@ def print_profile():
# Mean, Variance, Standard Deviation, Skewness and Kurtosis
class RunningStats(object):
- "Calculate mean, variance, sigma, skewness and kurtosis"
+ """Calculate mean, variance, sigma, skewness and kurtosis."""
def __init__(self, values):
self.num = len(values) # number of samples
self.mu = 0.0 # simple arithmetic mean
@@ -202,8 +202,8 @@ class RunningStats(object):
# class for calced values
class VizStats(ntp.statfiles.NTPStats):
- "Class for calculated values"
+ """Class for calculated values."""
percs = {} # dictionary of percentages
title = '' # title
unit = 's' # display units: s, ppm, etc.
@@ -373,7 +373,7 @@ class VizStats(ntp.statfiles.NTPStats):
def gnuplot_fmt(min_val, max_val):
- "return optimal gnuplot format"
+ """return optimal gnuplot format."""
span = max_val - min_val
if 6 <= span:
fmt = '%.0f'
@@ -392,7 +392,7 @@ def gnuplot_fmt(min_val, max_val):
# Investigate.
def gnuplot(template, outfile=None):
- "Run a specified gnuplot program."
+ """Run a specified gnuplot program."""
if not template:
# silently ignore empty plots
@@ -444,8 +444,8 @@ def gnuplot(template, outfile=None):
class NTPViz(ntp.statfiles.NTPStats):
- "Class for visualizing statistics from a single server."
+ """Class for visualizing statistics from a single server."""
# Python takes single quotes here. Since no % substitution
Common = """\
set grid
@@ -468,7 +468,7 @@ set rmargin 10
endtime=endtime)
def plot_slice(self, rows, item1, item2=None):
- "slice 0,item1, maybe item2, from rows, ready for gnuplot"
+ """slice 0,item1, maybe item2, from rows, ready for gnuplot."""
# speed up by only sending gnuplot the data it will actually use
# WARNING: this is hot code, only modify if you profile
# since we are looping the data, get the values too
@@ -515,7 +515,7 @@ set rmargin 10
return (plot_data, values1)
def local_offset_gnuplot(self):
- "Generate gnuplot code graphing local clock loop statistics"
+ """Generate gnuplot code graphing local clock loop statistics."""
if not self.loopstats:
sys.stderr.write("ntpviz: WARNING: no loopstats to graph\n")
return ''
@@ -578,7 +578,7 @@ file.</p>
return ret
def local_freq_temps_plot(self):
- "Generate gnuplot code graphing local frequency and temps"
+ """Generate gnuplot code graphing local frequency and temps."""
if not self.loopstats:
sys.stderr.write("ntpviz: WARNING: no loopstats to graph\n")
return ''
@@ -671,7 +671,7 @@ file, and field 3 from the tempstats log file.</p>
return ret
def local_temps_gnuplot(self):
- "Generate gnuplot code graphing local temperature statistics"
+ """Generate gnuplot code graphing local temperature statistics."""
sitename = self.sitename
tempsmap = self.tempssplit()
tempslist = list(tempsmap.keys())
@@ -733,7 +733,7 @@ component of frequency drift.</p>
return ret
def local_gps_gnuplot(self):
- "Generate gnuplot code graphing local GPS statistics"
+ """Generate gnuplot code graphing local GPS statistics."""
sitename = self.sitename
gpsmap = self.gpssplit()
gpslist = list(gpsmap.keys())
@@ -816,7 +816,7 @@ impossible.</p>
return ret
def local_error_gnuplot(self):
- "Plot the local clock frequency error."
+ """Plot the local clock frequency error."""
if not self.loopstats:
sys.stderr.write("ntpviz: WARNING: no loopstats to graph\n")
return ''
@@ -875,7 +875,7 @@ line at 0ppm. Expected values of 99%-1% percentiles: 0.4ppm</p>
return ret
def loopstats_gnuplot(self, fld, title, legend, freq):
- "Generate gnuplot code of a given loopstats field"
+ """Generate gnuplot code of a given loopstats field."""
if not self.loopstats:
sys.stderr.write("ntpviz: WARNING: no loopstats to graph\n")
return ''
@@ -943,16 +943,16 @@ plot \
return ret
def local_offset_jitter_gnuplot(self):
- "Generate gnuplot code of local clock loop standard deviation"
+ """Generate gnuplot code of local clock loop standard deviation."""
return self.loopstats_gnuplot(4, "Local RMS Time Jitter", "Jitter", 0)
def local_offset_stability_gnuplot(self):
- "Generate gnuplot code graphing local clock stability"
+ """Generate gnuplot code graphing local clock stability."""
return self.loopstats_gnuplot(5, "Local RMS Frequency Jitter",
"Stability", 1)
def peerstats_gnuplot(self, peerlist, fld, title, ptype):
- "Plot a specified field from peerstats."
+ """Plot a specified field from peerstats."""
peerdict = self.peersplit()
if not peerlist:
@@ -1167,17 +1167,17 @@ plot \
return ret
def peer_offsets_gnuplot(self, peerlist=None):
- "gnuplot Peer Offsets"
+ """gnuplot Peer Offsets."""
return self.peerstats_gnuplot(peerlist, 4, "Server Offset",
"offset")
def peer_jitters_gnuplot(self, peerlist=None):
- "gnuplot Peer Jitters"
+ """gnuplot Peer Jitters."""
return self.peerstats_gnuplot(peerlist, 7, "Server Jitter",
"jitter")
def local_offset_histogram_gnuplot(self):
- "Plot a histogram of clock offset values from loopstats."
+ """Plot a histogram of clock offset values from loopstats."""
if not self.loopstats:
sys.stderr.write("ntpviz: WARNING: no loopstats to graph\n")
return ''
@@ -1286,7 +1286,7 @@ plot \
def local_offset_multiplot(statlist):
- "Plot comparative local offsets for a list of NTPViz objects."
+ """Plot comparative local offsets for a list of NTPViz objects."""
out = {}
out['size'] = args.img_size
=====================================
pylib/agentx.py
=====================================
@@ -106,15 +106,15 @@ class MIBControl:
# These exist instead of just using getOID_core so semantics are clearer
def getOID(self, searchoid, returnGenerator=False):
- "Get the requested OID"
+ """Get the requested OID."""
return self.getOID_core(False, searchoid, returnGenerator)
def getNextOID(self, searchoid, returnGenerator=False):
- "Get the next lexicographical OID"
+ """Get the next lexicographical OID."""
return self.getOID_core(True, searchoid, returnGenerator)
def getOIDsInRange(self, oidrange, firstOnly=False):
- "Get a list of every (optionally the first) OID in a range"
+ """Get a list of every (optionally the first) OID in a range."""
oids = []
gen = walkMIBTree(self.oidTree, self.mibRoot)
# Find the first OID
@@ -246,7 +246,8 @@ class PacketControl:
self.stillConnected = True
def waitForResponse(self, opkt, ignoreSID=False):
- "Wait for a response to a specific packet, dropping everything else"
+ """Wait for a response to a specific packet, dropping everything
+ else."""
while True:
self.packetEater()
while self.receivedPackets:
@@ -263,7 +264,7 @@ class PacketControl:
time.sleep(self.spinGap)
def checkResponses(self):
- "Check for expected responses that have timed out"
+ """Check for expected responses that have timed out."""
currentTime = time.time()
for key in list(self.packetLog.keys()):
expiration, originalPkt, callback = self.packetLog[key]
@@ -273,7 +274,8 @@ class PacketControl:
del self.packetLog[key]
def packetEater(self):
- "Slurps data from the input buffer and tries to parse packets from it"
+ """Slurps data from the input buffer and tries to parse packets from
+ it."""
self.pollSocket()
while True:
datalen = len(self.receivedData)
@@ -345,7 +347,7 @@ class PacketControl:
self.sendPacket(err, False)
def pollSocket(self):
- "Reads all currently available data from the socket, non-blocking"
+ """Reads all currently available data from the socket, non-blocking."""
data = b""
while True:
tmp = select.select([self.socket], [], [], 0)[0]
=====================================
pylib/agentx_packet.py
=====================================
@@ -86,7 +86,8 @@ class AgentXPDU:
self._hascontext = hascontext
def packetVars(self):
- "Assembles a list of class variables that it is desirable to print"
+ """Assembles a list of class variables that it is desirable to
+ print."""
pktvars = {}
names = dir(self)
names.remove("context")
@@ -730,7 +731,8 @@ class ResponsePDU(AgentXPDU):
def classifyOID(oid):
- "Utility function to allow the user to send a bare tuple for some cases"
+ """Utility function to allow the user to send a bare tuple for some
+ cases."""
if isinstance(oid, OID):
return oid
return OID(oid, False)
=====================================
pylib/packet.py
=====================================
@@ -262,7 +262,8 @@ MAX_BARE_MAC_LENGTH = 20
class Packet:
- "Encapsulate an NTP fragment"
+
+ """Encapsulate an NTP fragment."""
# The following two methods are copied from macros in includes/control.h
@staticmethod
def VN_MODE(v, m):
@@ -311,7 +312,8 @@ class SyncException(BaseException): # pragma: no cover
class SyncPacket(Packet):
- "Mode 1-5 time-synchronization packet, including SNTP."
+
+ """Mode 1-5 time-synchronization packet, including SNTP."""
format = "!BBBbIIIQQQQ"
HEADER_LEN = 48
UNIX_EPOCH = 2208988800 # Midnight 1 Jan 1970 in secs since NTP epoch
@@ -384,19 +386,19 @@ class SyncPacket(Packet):
@staticmethod
def ntp_to_posix(t):
- "Scale from NTP time to POSIX time"
+ """Scale from NTP time to POSIX time."""
# Note: assumes we're in the same NTP era as the transmitter...
return (t / (2**32)) - SyncPacket.UNIX_EPOCH
@staticmethod
def posix_to_ntp(t):
- "Scale from POSIX time to NTP time"
+ """Scale from POSIX time to NTP time."""
# Note: assumes we're in the same NTP era as the transmitter...
# This receives floats, can't use shifts
return int((t + SyncPacket.UNIX_EPOCH) * 2**32)
def posixize(self):
- "Rescale all timestamps to POSIX time."
+ """Rescale all timestamps to POSIX time."""
if not self.rescaled:
self.rescaled = True
self.root_delay >>= 16
@@ -424,16 +426,16 @@ class SyncPacket(Packet):
return self.received
def delta(self):
- "Packet flight time"
+ """Packet flight time."""
return (self.t4() - self.t1()) - (self.t3() - self.t2())
def epsilon(self):
- "Residual error due to clock imprecision."
+ """Residual error due to clock imprecision."""
# FIXME: Include client imprecision.
return SyncPacket.PHI * (self.t4() - self.t1()) + 2**self.precision
def synchd(self):
- "Synchronization distance, estimates worst-case error in seconds"
+ """Synchronization distance, estimates worst-case error in seconds."""
# This is "lambda" in NTP-speak, but that's a Python keyword
return abs(self.delta()/2 + self.epsilon())
@@ -442,7 +444,7 @@ class SyncPacket(Packet):
return ((self.t2()-self.t1())+(self.t3()-self.t4()))/2
def flatten(self):
- "Flatten the packet into an octet sequence."
+ """Flatten the packet into an octet sequence."""
body = struct.pack(SyncPacket.format,
self.li_vn_mode,
self.stratum,
@@ -458,18 +460,18 @@ class SyncPacket(Packet):
return body + self.extension
def refid_octets(self):
- "Analyze refid into octets."
+ """Analyze refid into octets."""
return ((self.refid >> 24) & 0xff,
(self.refid >> 16) & 0xff,
(self.refid >> 8) & 0xff,
self.refid & 0xff)
def refid_as_string(self):
- "Sometimes it's a clock name or KOD type"
+ """Sometimes it's a clock name or KOD type."""
return ntp.poly.polystr(struct.pack(*(("BBBB",) + self.refid_octets())))
def refid_as_address(self):
- "Sometimes it's an IPV4 address."
+ """Sometimes it's an IPV4 address."""
return ntp.poly.polystr("%d.%d.%d.%d" % self.refid_octets())
def is_crypto_nak(self):
@@ -482,7 +484,7 @@ class SyncPacket(Packet):
return len(self.mac) == 24
def __repr__(self):
- "Represent a posixized sync packet in an eyeball-friendly format."
+ """Represent a posixized sync packet in an eyeball-friendly format."""
r = "<NTP:%s:%d:%d:" % (self.leap(), self.version(), self.mode())
r += "%f:%f" % (self.root_delay, self.root_dispersion)
rs = self.refid_as_string()
@@ -506,7 +508,8 @@ class SyncPacket(Packet):
class ControlPacket(Packet):
- "Mode 6 request/response."
+
+ """Mode 6 request/response."""
def __init__(self, session, opcode=0, associd=0, qdata=''):
Packet.__init__(self, mode=ntp.magic.MODE_CONTROL,
@@ -541,7 +544,7 @@ class ControlPacket(Packet):
return self.count + self.offset
def stats(self):
- "Return statistics on a fragment."
+ """Return statistics on a fragment."""
return "%5d %5d\t%3d octets\n" % (self.offset, self.end(), self.count)
def analyze(self, rawdata):
@@ -558,7 +561,7 @@ class ControlPacket(Packet):
return (self.sequence, self.status, self.associd, self.offset)
def flatten(self):
- "Flatten the packet into an octet sequence."
+ """Flatten the packet into an octet sequence."""
body = struct.pack(ControlPacket.format,
self.li_vn_mode,
self.r_e_m_op,
@@ -574,7 +577,8 @@ class ControlPacket(Packet):
class Peer:
- "The information we have about an NTP peer."
+
+ """The information we have about an NTP peer."""
def __init__(self, session, associd, status):
self.session = session
@@ -618,7 +622,7 @@ SERR_NOTRUST = "***No trusted keys have been declared"
def dump_hex_printable(xdata, outfp=sys.stdout):
- "Dump a packet in hex, in a familiar hex format"
+ """Dump a packet in hex, in a familiar hex format."""
rowsize = 16
while xdata:
# Slice one row off of our data
@@ -638,7 +642,8 @@ def dump_hex_printable(xdata, outfp=sys.stdout):
class MRUEntry:
- "A traffic entry for an MRU list."
+
+ """A traffic entry for an MRU list."""
def __init__(self):
self.addr = None # text of IPv4 or IPv6 address and port
@@ -678,14 +683,16 @@ class MRUEntry:
class MRUList:
- "A sequence of address-timespan pairs returned by ntpd in one response."
+
+ """A sequence of address-timespan pairs returned by ntpd in one
+ response."""
def __init__(self):
self.entries = [] # A list of MRUEntry objects
self.now = None # server timestamp marking end of operation
def is_complete(self):
- "Is the server done shipping entries for this span?"
+ """Is the server done shipping entries for this span?"""
return self.now is not None
def __repr__(self):
@@ -703,7 +710,8 @@ class ControlException(BaseException):
class ControlSession:
- "A session to a host"
+
+ """A session to a host."""
MRU_ROW_LIMIT = 256
_authpass = True
server_errors = {
@@ -750,11 +758,11 @@ class ControlSession:
self.sock = None
def havehost(self):
- "Is the session connected to a host?"
+ """Is the session connected to a host?"""
return self.sock is not None
def __lookuphost(self, hname, fam):
- "Try different ways to interpret an address and family"
+ """Try different ways to interpret an address and family."""
if hname.startswith("["):
hname = hname[1:-1]
# First try to resolve it as an ip address and if that fails,
@@ -838,7 +846,7 @@ class ControlSession:
return True
def password(self):
- "Get a keyid and the password if we don't have one."
+ """Get a keyid and the password if we don't have one."""
if self.keyid is None:
if self.auth is None:
try:
@@ -879,7 +887,7 @@ class ControlSession:
self.passwd = passwd
def sendpkt(self, xdata):
- "Send a packet to the host."
+ """Send a packet to the host."""
while len(xdata) % 4:
xdata += b"\x00"
ntp.util.dolog(self.logfp,
@@ -899,7 +907,7 @@ class ControlSession:
return 0
def sendrequest(self, opcode, associd, qdata, auth=False):
- "Ship an ntpq request packet to a server."
+ """Ship an ntpq request packet to a server."""
if (self.debug >= 1) and (self.logfp is not None):
# special, not replacing with dolog()
if self.debug >= 3:
@@ -952,7 +960,7 @@ class ControlSession:
return pkt.send()
def getresponse(self, opcode, associd, timeo):
- "Get a response expected to match a given opcode and associd."
+ """Get a response expected to match a given opcode and associd."""
# This is pretty tricky. We may get between 1 and MAXFRAG packets
# back in response to the request. We peel the data out of
# each packet and collect it in one long block. When the last
@@ -1194,7 +1202,7 @@ class ControlSession:
return True
def doquery(self, opcode, associd=0, qdata="", auth=False):
- "send a request and save the response"
+ """Send a request and save the response."""
if not self.havehost():
raise ControlException(SERR_NOHOST)
retry = True
@@ -1215,7 +1223,7 @@ class ControlSession:
return res
def readstat(self, associd=0):
- "Read peer status, or throw an exception."
+ """Read peer status, or throw an exception."""
self.doquery(opcode=ntp.control.CTL_OP_READSTAT, associd=associd)
if len(self.response) % 4:
raise ControlException(SERR_BADLENGTH)
@@ -1229,7 +1237,7 @@ class ControlSession:
return idlist
def __parse_varlist(self, raw=False):
- "Parse a response as a textual varlist."
+ """Parse a response as a textual varlist."""
# Strip out NULs and binary garbage from text;
# ntpd seems prone to generate these, especially
# in reslist responses.
@@ -1283,7 +1291,7 @@ class ControlSession:
def readvar(self, associd=0, varlist=None,
opcode=ntp.control.CTL_OP_READVAR, raw=False):
- "Read system vars from the host as a dict, or throw an exception."
+ """Read system vars from the host as a dict, or throw an exception."""
if varlist is None:
qdata = ""
else:
@@ -1292,7 +1300,10 @@ class ControlSession:
return self.__parse_varlist(raw)
def config(self, configtext):
- "Send configuration text to the daemon. Return True if accepted."
+ """Send configuration text to the daemon.
+
+ Return True if accepted.
+ """
self.doquery(opcode=ntp.control.CTL_OP_CONFIGURE,
qdata=configtext, auth=True)
# Copes with an implementation error - ntpd uses putdata without
@@ -1305,10 +1316,10 @@ class ControlSession:
return self.response == ntp.poly.polybytes("Config Succeeded")
def fetch_nonce(self):
+ """Ask for, and get, a nonce that can be replayed.
+
+ This combats source address spoofing
"""
-Ask for, and get, a nonce that can be replayed.
-This combats source address spoofing
-"""
for i in range(4):
# retry 4 times
self.doquery(opcode=ntp.control.CTL_OP_REQ_NONCE)
@@ -1327,7 +1338,7 @@ This combats source address spoofing
raise ControlException(SERR_BADNONCE)
def __mru_analyze(self, variables, span, direct):
- """Extracts data from the key/value list into a more useful form"""
+ """Extracts data from the key/value list into a more useful form."""
mru = None
nonce = None
items = list(variables.items())
@@ -1417,7 +1428,7 @@ This combats source address spoofing
return restarted_count, cap_frags, limit, frags
def mrulist(self, variables=None, rawhook=None, direct=None):
- "Retrieve MRU list data"
+ """Retrieve MRU list data."""
restarted_count = 0
cap_frags = True
sorter = None
@@ -1523,7 +1534,7 @@ This combats source address spoofing
return span
def __ordlist(self, listtype):
- "Retrieve ordered-list data."
+ """Retrieve ordered-list data."""
self.doquery(opcode=ntp.control.CTL_OP_READ_ORDLIST_A,
qdata=listtype, auth=True)
stanzas = []
@@ -1538,11 +1549,11 @@ This combats source address spoofing
return stanzas
def reslist(self):
- "Retrieve reslist data."
+ """Retrieve reslist data."""
return self.__ordlist("addr_restrictions")
def ifstats(self):
- "Retrieve ifstats data."
+ """Retrieve ifstats data."""
return self.__ordlist("ifstats")
@@ -1681,7 +1692,8 @@ def mru_kv_key(token):
class Authenticator:
- "MAC authentication manager for NTP packets."
+
+ """MAC authentication manager for NTP packets."""
def __init__(self, keyfile=None):
# We allow I/O and permission errors upward deliberately
@@ -1703,15 +1715,15 @@ class Authenticator:
self.passwords[int(keyid)] = (keytype, passwd)
def __len__(self):
- 'return the number of keytype/passwd tuples stored'
+ """Return the number of keytype/passwd tuples stored."""
return len(self.passwords)
def __getitem__(self, keyid):
- 'get a keytype/passwd tuple by keyid'
+ """Get a keytype/passwd tuple by keyid."""
return self.passwords.get(keyid)
def control(self, keyid=None):
- "Get the keytype/passwd tuple that controls localhost and its id"
+ """Get the keytype/passwd tuple that controls localhost and its id."""
if keyid is not None:
if keyid in self.passwords:
return (keyid,) + self.passwords[keyid]
@@ -1732,7 +1744,7 @@ class Authenticator:
@staticmethod
def compute_mac(payload, keyid, keytype, passwd):
- 'Create the authentication payload to send'
+ """Create the authentication payload to send."""
if not ntp.ntpc.checkname(keytype):
return False
mac2 = ntp.ntpc.mac(ntp.poly.polybytes(payload),
@@ -1743,14 +1755,15 @@ class Authenticator:
@staticmethod
def have_mac(packet):
- "Does this packet have a MAC?"
+ """Does this packet have a MAC?"""
# According to RFC 5909 7.5 the MAC is always present when an extension
# field is present. Note: this crude test will fail on Mode 6 packets.
# On those you have to go in and look at the count.
return len(packet) > ntp.magic.LEN_PKT_NOMAC
def verify_mac(self, packet, packet_end=48, mac_begin=48):
- "Does the MAC on this packet verify according to credentials we have?"
+ """Does the MAC on this packet verify according to credentials we
+ have?"""
payload = packet[:packet_end]
keyid = packet[mac_begin:mac_begin+KEYID_LENGTH]
mac = packet[mac_begin+KEYID_LENGTH:]
=====================================
pylib/statfiles.py
=====================================
@@ -19,7 +19,8 @@ import time
class NTPStats:
- "Gather statistics for a specified NTP site"
+
+ """Gather statistics for a specified NTP site."""
SecondsInDay = 24*60*60
DefaultPeriod = 7*24*60*60 # default 7 days, 604800 secs
peermap = {} # cached result of peersplit()
@@ -31,8 +32,10 @@ class NTPStats:
@staticmethod
def unixize(lines, starttime, endtime):
"""Extract first two fields, MJD and seconds past midnight.
+
convert timestamp (MJD & seconds past midnight) to Unix time
- Replace MJD+second with Unix time."""
+ Replace MJD+second with Unix time.
+ """
# HOT LOOP! Do not change w/o profiling before and after
lines1 = []
for line in lines:
@@ -56,13 +59,15 @@ class NTPStats:
@staticmethod
def timestamp(line):
- "get Unix time from converted line."
+ """Get Unix time from converted line."""
return float(line.split()[0])
@staticmethod
def percentiles(percents, values):
"""Return given percentiles of a given row in a given set of entries.
- assuming values are already split and sorted"""
+
+ assuming values are already split and sorted
+ """
ret = {}
length = len(values)
if 1 >= length:
@@ -85,7 +90,7 @@ class NTPStats:
@staticmethod
def ip_label(key):
- "Produce appropriate label for an IP address."
+ """Produce appropriate label for an IP address."""
# If it's a new-style NTPsep clock label, pass it through,
# Otherwise we expect it to be an IP address and the next guard fires
if key[0].isdigit():
@@ -108,7 +113,7 @@ class NTPStats:
def __init__(self, statsdir, sitename=None,
period=None, starttime=None, endtime=None):
- "Grab content of logfiles, sorted by timestamp."
+ """Grab content of logfiles, sorted by timestamp."""
if period is None:
period = NTPStats.DefaultPeriod
self.period = period
@@ -201,7 +206,9 @@ class NTPStats:
def peersplit(self):
"""Return a dictionary mapping peerstats IPs to entry subsets.
- This is very expensive, so cache the result"""
+
+ This is very expensive, so cache the result
+ """
if self.peermap:
return self.peermap
@@ -217,7 +224,7 @@ class NTPStats:
return self.peermap
def gpssplit(self):
- "Return a dictionary mapping gps sources to entry subsets."
+ """Return a dictionary mapping gps sources to entry subsets."""
gpsmap = {}
for row in self.gpsd:
try:
@@ -231,7 +238,7 @@ class NTPStats:
return gpsmap
def tempssplit(self):
- "Return a dictionary mapping temperature sources to entry subsets."
+ """Return a dictionary mapping temperature sources to entry subsets."""
tempsmap = {}
for row in self.temps:
try:
@@ -246,7 +253,10 @@ class NTPStats:
def iso_to_posix(time_string):
- "Accept timestamps in ISO 8661 format or numeric POSIX time. UTC only."
+ """Accept timestamps in ISO 8661 format or numeric POSIX time.
+
+ UTC only.
+ """
if str(time_string).isdigit():
return int(time_string)
time_struct = time.strptime(time_string, "%Y-%m-%dT%H:%M:%S")
@@ -255,7 +265,7 @@ def iso_to_posix(time_string):
def posix_to_iso(unix_time):
- "ISO 8601 string in UTC from Unix time."
+ """ISO 8601 string in UTC from Unix time."""
return time.strftime("%Y-%m-%dT%H:%M:%S", time.gmtime(unix_time))
# end
=====================================
pylib/util.py
=====================================
@@ -1,10 +1,11 @@
# -*- coding: utf-8 -*-
-"Common utility functions"
+"""Common utility functions."""
# SPDX-License-Identifier: BSD-2-Clause
from __future__ import print_function, division
+import ast
import collections
import os
import re
@@ -59,6 +60,7 @@ def check_unicode(): # pragma: no cover
def deunicode_units(): # pragma: no cover
"""Under certain conditions it is not possible to force unicode output,
+
this overwrites units that contain unicode with safe versions"""
global UNIT_US
global UNIT_PPK
@@ -85,6 +87,7 @@ PPM_VARS = ("frequency", "clk_wander")
def dolog(logfp, text, debug, threshold):
"""debug is the current debug value
+
threshold is the trigger for the current log"""
if logfp is None:
return # can turn off logging by supplying a None file descriptor
@@ -96,8 +99,10 @@ def dolog(logfp, text, debug, threshold):
def safeargcast(arg, castfunc, errtext, usage):
"""Attempts to typecast an argument, prints and dies on failure.
+
errtext must contain a %s for splicing in the argument, and be
- newline terminated."""
+ newline terminated.
+ """
try:
casted = castfunc(arg)
except ValueError:
@@ -108,12 +113,12 @@ def safeargcast(arg, castfunc, errtext, usage):
def stdversion():
- "Returns the NTPsec version string in a standard format"
+ """Returns the NTPsec version string in a standard format."""
return "ntpsec-%s" % "@NTPSEC_VERSION_EXTENDED@"
def rfc3339(t):
- "RFC 3339 string from Unix time, including fractional second."
+ """RFC 3339 string from Unix time, including fractional second."""
rep = time.strftime("%Y-%m-%dT%H:%M:%S", time.gmtime(t))
t = str(t)
if "." in t:
@@ -141,7 +146,7 @@ def hexstr2octets(hexstr):
def slicedata(data, slicepoint):
- "Breaks a sequence into two pieces at the slice point"
+ """Breaks a sequence into two pieces at the slice point."""
return data[:slicepoint], data[slicepoint:]
@@ -199,7 +204,7 @@ def parseConf(text):
elif text[i] == "\\": # Starting an escape sequence
i += 1
if text[i] in "'\"n\\":
- current.append(eval("\'\\" + text[i] + "\'"))
+ current.append(ast.literal_eval("\'\\" + text[i] + "\'"))
else:
current.append(text[i])
else:
@@ -229,7 +234,7 @@ def parseConf(text):
def stringfilt(data):
- "Pretty print string of space separated numbers"
+ """Pretty print string of space separated numbers."""
parts = data.split()
cooked = []
@@ -244,14 +249,15 @@ def stringfilt(data):
def stringfiltcooker(data):
- "Cooks a filt* string of space separated numbers, expects milliseconds"
+ """Cooks a filt* string of space separated numbers, expects
+ milliseconds."""
parts = data.split()
oomcount = {}
minscale = -100000 # Keep track of the maxdownscale for each value
# Find out what the 'natural' unit of each value is
for part in parts:
# Only care about OOMs, the real scaling happens later
- value, oom = scalestring(part)
+ oom = scalestring(part)[1]
# Track the highest maxdownscale so we do not invent precision
ds = maxdownscale(part)
minscale = max(ds, minscale)
@@ -278,14 +284,14 @@ def stringfiltcooker(data):
def getunitgroup(unit):
- "Returns the unit group which contains a given unit"
+ """Returns the unit group which contains a given unit."""
for group in unitgroups:
if unit in group:
return group
def oomsbetweenunits(a, b):
- "Calculates how many orders of magnitude separate two units"
+ """Calculates how many orders of magnitude separate two units."""
group = getunitgroup(a)
if b is None: # Caller is asking for the distance from the base unit
return group.index(a) * 3
@@ -297,7 +303,7 @@ def oomsbetweenunits(a, b):
def breaknumberstring(value):
- "Breaks a number string into (aboveDecimal, belowDecimal, isNegative?)"
+ """Breaks a number string into (aboveDecimal, belowDecimal, isNegative?)"""
if value[0] == "-":
value = value[1:]
negative = True
@@ -312,7 +318,7 @@ def breaknumberstring(value):
def gluenumberstring(above, below, isnegative):
- "Glues together parts of a number string"
+ """Glues together parts of a number string."""
if above == "":
above = "0"
if below:
@@ -325,18 +331,17 @@ def gluenumberstring(above, below, isnegative):
def maxdownscale(value):
- "Maximum units a value can be scaled down without inventing data"
+ """Maximum units a value can be scaled down without inventing data."""
if "." in value:
digitcount = len(value.split(".")[1])
# Return a negative so it can be fed directly to a scaling function
return -(digitcount // 3)
- else:
- # No decimals, the value is already at the maximum down-scale
- return 0
+ # No decimals, the value is already at the maximum down-scale
+ return 0
def rescalestring(value, unitsscaled):
- "Rescale a number string by a given number of units"
+ """Rescale a number string by a given number of units."""
whole, dec, negative = breaknumberstring(value)
if unitsscaled == 0:
# This may seem redundant, but glue forces certain formatting details
@@ -371,14 +376,14 @@ def rescalestring(value, unitsscaled):
def formatzero(value):
- "Scale a zero value for the unit with the highest available precision"
+ """Scale a zero value for the unit with the highest available precision."""
scale = maxdownscale(value)
newvalue = rescalestring(value, scale).lstrip("-")
return (newvalue, scale)
def scalestring(value):
- "Scales a number string to fit in the range 1.0-999.9"
+ """Scales a number string to fit in the range 1.0-999.9."""
if isstringzero(value):
return formatzero(value)
whole, dec, negative = breaknumberstring(value)
@@ -414,7 +419,8 @@ def scalestring(value):
def fitinfield(value, fieldsize):
- "Attempt to fit value into a field, preserving as much data as possible"
+ """Attempt to fit value into a field, preserving as much data as
+ possible."""
vallen = len(value)
if fieldsize is None:
newvalue = value
@@ -444,7 +450,7 @@ def fitinfield(value, fieldsize):
def cropprecision(value, ooms):
- "Crops digits below the maximum precision"
+ """Crops digits below the maximum precision."""
if "." not in value: # No decimals, nothing to crop
return value
if ooms == 0: # We are at the baseunit, crop it all
@@ -459,7 +465,7 @@ def cropprecision(value, ooms):
def isstringzero(value):
- "Detects whether a string is equal to zero"
+ """Detects whether a string is equal to zero."""
for i in value:
if i not in ("-", ".", "0"):
return False
@@ -467,23 +473,21 @@ def isstringzero(value):
def unitrelativeto(unit, move):
- "Returns a unit at a different scale from the input unit"
+ """Returns a unit at a different scale from the input unit."""
for group in unitgroups:
if unit in group:
if move is None: # asking for the base unit
return group[0]
- else:
- index = group.index(unit)
- index += move # index of the new unit
- if 0 <= index < len(group): # found the new unit
- return group[index]
- else: # not in range
- return None
+ index = group.index(unit)
+ index += move # index of the new unit
+ if 0 <= index < len(group): # found the new unit
+ return group[index]
+ return None
return None # couldn't find anything
def unitifyvar(value, varname, baseunit=None, width=8, unitSpace=False):
- "Call unitify() with the correct units for varname"
+ """Call unitify() with the correct units for varname."""
if varname in S_VARS:
start = UNIT_S
elif varname in MS_VARS:
@@ -496,7 +500,10 @@ def unitifyvar(value, varname, baseunit=None, width=8, unitSpace=False):
def unitify(value, startingunit, baseunit=None, width=8, unitSpace=False):
- "Formats a numberstring with relevant units. Attempts to fit in width."
+ """Formats a numberstring with relevant units.
+
+ Attempts to fit in width.
+ """
if baseunit is None:
baseunit = getunitgroup(startingunit)[0]
ooms = oomsbetweenunits(startingunit, baseunit)
@@ -525,46 +532,9 @@ def unitify(value, startingunit, baseunit=None, width=8, unitSpace=False):
return newvalue
-def f8dot4(f):
- "Scaled floating point formatting to fit in 8 characters"
-
- if isinstance(f, str):
- # a string? pass it on as a signal
- return "%8s" % f
- if not isinstance(f, (int, float)):
- # huh?
- return " X"
- if str(float(f)).lower() == 'nan':
- # yes, this is a better test than math.isnan()
- # it also catches None, strings, etc.
- return " nan"
-
- fmt = "%8d" # xxxxxxxx or -xxxxxxx
- if f >= 0:
- if f < 1000.0:
- fmt = "%8.4f" # xxx.xxxx normal case
- elif f < 10000.0:
- fmt = "%8.3f" # xxxx.xxx
- elif f < 100000.0:
- fmt = "%8.2f" # xxxxx.xx
- elif f < 1000000.0:
- fmt = "%8.1f" # xxxxxx.x
- else:
- # negative number, account for minus sign
- if f > -100.0:
- fmt = "%8.4f" # -xx.xxxx normal case
- elif f > -1000.0:
- fmt = "%8.3f" # -xxx.xxx
- elif f > -10000.0:
- fmt = "%8.2f" # -xxxx.xx
- elif f > -100000.0:
- fmt = "%8.1f" # -xxxxx.x
-
- return fmt % f
-
+def f8poly(f, clip):
+ """Scaled floating point formatting to fit in 8 characters."""
-def f8dot3(f):
- "Scaled floating point formatting to fit in 8 characters"
if isinstance(f, str):
# a string? pass it on as a signal
return "%8s" % f
@@ -575,29 +545,21 @@ def f8dot3(f):
# yes, this is a better test than math.isnan()
# it also catches None, strings, etc.
return " nan"
+ # The following chunk is thool code
+ digits = 8 if f >= 0 else 7
+ fab = abs(f)
+ for _ in range(5, 0, -1):
+ if fab < 10 ** (digits - _ - 1):
+ return '{:8.{}f}'.format(f, min(clip, _))
+ return '%8d' % f
- fmt = "%8d" # xxxxxxxx or -xxxxxxx
- if f >= 0:
- if f < 10000.0:
- fmt = "%8.3f" # xxxx.xxx normal case
- elif f < 100000.0:
- fmt = "%8.2f" # xxxxx.xx
- elif f < 1000000.0:
- fmt = "%8.1f" # xxxxxx.x
- else:
- # negative number, account for minus sign
- if f > -1000.0:
- fmt = "%8.3f" # -xxx.xxx normal case
- elif f > -10000.0:
- fmt = "%8.2f" # -xxxx.xx
- elif f > -100000.0:
- fmt = "%8.1f" # -xxxxx.x
- return fmt % f
+f8dot4 = lambda f: f8poly(f, 4)
+f8dot3 = lambda f: f8poly(f, 3)
def monoclock():
- "Try to get a monotonic clock value unaffected by NTP stepping."
+ """Try to get a monotonic clock value unaffected by NTP stepping."""
try:
# Available in Python 3.3 and up.
return time.monotonic()
@@ -606,8 +568,11 @@ def monoclock():
class Cache:
+
"Simple time-based cache"
+ """Simple time-based cache."""
+
def __init__(self, defaultTimeout=300): # 5 min default TTL
self.defaultTimeout = defaultTimeout
self._cache = {}
@@ -617,11 +582,9 @@ class Cache:
value, settime, ttl = self._cache[key]
if settime >= monoclock() - ttl:
return value
- else: # key expired, delete it
- del self._cache[key]
- return None
- else:
+ del self._cache[key] # key expired, delete it
return None
+ return None
def set(self, key, value, customTTL=None):
ttl = customTTL if customTTL is not None else self.defaultTimeout
@@ -633,7 +596,7 @@ canonicalization_cache = Cache()
def canonicalize_dns(inhost, family=socket.AF_UNSPEC):
- "Canonicalize a hostname or numeric IP address."
+ """Canonicalize a hostname or numeric IP address."""
resname = canonicalization_cache.get(inhost)
if resname is not None:
return resname
@@ -647,7 +610,7 @@ def canonicalize_dns(inhost, family=socket.AF_UNSPEC):
socket.AI_CANONNAME)
except socket.gaierror:
return "DNSFAIL:%s" % hostname
- (family, socktype, proto, canonname, sockaddr) = ai[0]
+ (family, socktype, _, canonname, sockaddr) = ai[0]
try:
name = socket.getnameinfo(sockaddr, socket.NI_NAMEREQD)
result = name[0].lower() + portsuffix
@@ -674,7 +637,7 @@ if str is bytes: # We are on python 2.x
def termsize(): # pragma: no cover
- "Return the current terminal size."
+ """Return the current terminal size."""
# Alternatives at http://stackoverflow.com/questions/566746
# The way this is used makes it not a big deal if the default is wrong.
size = (80, 24)
@@ -687,7 +650,7 @@ def termsize(): # pragma: no cover
else:
try:
# OK, Python version < 3.3, cope
- h, w, hp, wp = struct.unpack(
+ h, w, hp, _ = struct.unpack(
'HHHH',
fcntl.ioctl(2, termios.TIOCGWINSZ,
struct.pack('HHHH', 0, 0, 0, 0)))
@@ -698,8 +661,11 @@ def termsize(): # pragma: no cover
class PeerStatusWord:
+
"A peer status word from readstats(), dissected for display"
+ """A peer status word from readstats(), dissected for display."""
+
def __init__(self, status, pktversion=ntp.magic.NTP_VERSION):
# Event
self.event = ntp.control.CTL_PEER_EVENT(status)
@@ -775,7 +741,7 @@ class PeerStatusWord:
def cook(variables, showunits=False, sep=", "):
- "Cooked-mode variable display."
+ """Cooked-mode variable display."""
width = ntp.util.termsize().width - 2
text = ""
specials = ("filtdelay", "filtoffset", "filtdisp", "filterror")
@@ -825,7 +791,7 @@ def cook(variables, showunits=False, sep=", "):
"peer_loop", # BOGON12
"peer_unreach" # BOGON13
)
- for (i, n) in enumerate(tstflagnames):
+ for (i, _) in enumerate(tstflagnames):
if (1 << i) & value:
item += tstflagnames[i] + " "
item = item[:-1]
@@ -866,8 +832,8 @@ def cook(variables, showunits=False, sep=", "):
class PeerSummary:
- "Reusable report generator for peer statistics"
+ """Reusable report generator for peer statistics."""
def __init__(self, displaymode, pktversion, showhostnames,
wideremote, showunits=False, termwidth=None,
debug=0, logfp=sys.stderr):
@@ -899,7 +865,7 @@ class PeerSummary:
@staticmethod
def prettyinterval(diff):
- "Print an interval in natural time units."
+ """Print an interval in natural time units."""
if not isinstance(diff, int) or diff <= 0:
return '-'
if diff <= 2048:
@@ -915,20 +881,19 @@ class PeerSummary:
@staticmethod
def high_truncate(hostname, maxlen):
- "Truncate on the left using leading _ to indicate 'more'."
+ """Truncate on the left using leading _ to indicate 'more'."""
# Used for local IPv6 addresses, best distinguished by low bits
if len(hostname) <= maxlen:
return hostname
- else:
- return '-' + hostname[-maxlen+1:]
+ return '-' + hostname[-maxlen+1:]
@staticmethod
def is_clock(variables):
- "Does a set of variables look like it returned from a clock?"
+ """Does a set of variables look like it returned from a clock?"""
return "srchost" in variables and '(' in variables["srchost"][0]
def header(self):
- "Column headers for peer display"
+ """Column headers for peer display."""
if self.displaymode == "apeers":
self.__header = self.__remote + \
" refid assid ".ljust(self.refidwidth) + \
@@ -944,11 +909,11 @@ class PeerSummary:
return self.__header
def width(self):
- "Width of display"
+ """Width of display."""
return 79 + self.horizontal_slack
def summary(self, rstatus, variables, associd):
- "Peer status summary line."
+ """Peer status summary line."""
clock_name = ''
dstadr_refid = ""
dstport = 0
@@ -1219,14 +1184,15 @@ class PeerSummary:
return line
def intervals(self):
- "Return and flush the list of actual poll intervals."
+ """Return and flush the list of actual poll intervals."""
res = self.polls[:]
self.polls = []
return res
class MRUSummary:
- "Reusable class for MRU entry summary generation."
+
+ """Reusable class for MRU entry summary generation."""
def __init__(self, showhostnames, wideremote=False,
debug=0, logfp=sys.stderr):
@@ -1317,7 +1283,8 @@ class MRUSummary:
class ReslistSummary:
- "Reusable class for reslist entry summary generation."
+
+ """Reusable class for reslist entry summary generation."""
header = """\
hits addr/prefix or addr mask
restrictions
@@ -1357,7 +1324,8 @@ class ReslistSummary:
class IfstatsSummary:
- "Reusable class for ifstats entry summary generation."
+
+ """Reusable class for ifstats entry summary generation."""
header = """\
interface name send
# address/broadcast drop flag received sent failed peers uptime
@@ -1416,7 +1384,8 @@ try:
from collections import OrderedDict
except ImportError: # pragma: no cover
class OrderedDict(dict):
- "A stupid simple implementation in order to be back-portable to 2.6"
+ """A stupid simple implementation in order to be back-portable to
+ 2.6."""
# This can be simple because it doesn't need to be fast.
# The programs that use it only have to run at human speed,
=====================================
tests/pylib/test_ntpc.py
=====================================
@@ -1,3 +1,4 @@
+"""Pytest module for ntp.ntpc module."""
#! /usr/bin/env python
# -*- coding: utf-8 -*-
# SPDX-License-Identifier: BSD-2-Clause
@@ -6,6 +7,9 @@ import ntp.ntpc
class TestPylibNtpc(unittest.TestCase):
+
+ """Add test class for ntp.ntpc module."""
+
lfp_set = [
("0xcfba1ce0.80000000", 1276092000.5,
"cfba1ce0.80000000 2010-06-09T14:00:00.500Z"),
@@ -14,17 +18,19 @@ class TestPylibNtpc(unittest.TestCase):
]
def test_statustoa(self):
+ """Test that statustoa works correctly."""
self.assertEqual("leap_add_sec, sync_22, 7 events, no_sys_peer",
- ntp.ntpc.statustoa(ntp.ntpc.TYPE_SYS, 0x12345678));
+ ntp.ntpc.statustoa(ntp.ntpc.TYPE_SYS, 0x12345678))
self.assertEqual("authenb, reach, sel_sys.peer, 7 events, access_denied",
- ntp.ntpc.statustoa(ntp.ntpc.TYPE_PEER, 0x12345678));
+ ntp.ntpc.statustoa(ntp.ntpc.TYPE_PEER, 0x12345678))
self.assertEqual("7 events, clk_8",
- ntp.ntpc.statustoa(ntp.ntpc.TYPE_CLOCK, 0x12345678));
+ ntp.ntpc.statustoa(ntp.ntpc.TYPE_CLOCK, 0x12345678))
def test_lfp(self):
+ """Test that prettydate and lfptofloat work properly."""
for (in_string, to_float, to_string) in self.lfp_set:
- self.assertEqual(ntp.ntpc.prettydate(in_string), to_string);
- self.assertAlmostEqual(ntp.ntpc.lfptofloat(in_string), to_float);
+ self.assertEqual(ntp.ntpc.prettydate(in_string), to_string)
+ self.assertAlmostEqual(ntp.ntpc.lfptofloat(in_string), to_float)
if __name__ == '__main__':
=====================================
wafhelpers/asciidoc.py
=====================================
@@ -1,4 +1,4 @@
-'''Most of the functionality for building HTML and man pages from AsciiDoc.'''
+"""Most of the functionality for building HTML and man pages from AsciiDoc."""
import re
@@ -7,7 +7,7 @@ from waflib.TaskGen import extension # pylint: disable=import-error
def options(opt):
- 'Add command line options for AsciiDoc processing.'
+ """Add command line options for AsciiDoc processing."""
grp = opt.add_option_group('NTP documentation configure options')
grp.add_option('--disable-doc', action='store_true',
default=False, help='Disable HTML document building.')
@@ -20,8 +20,7 @@ def options(opt):
def configure(ctx):
- 'Set options from the extended environment and command line arguments.'
-
+ """Set options from the extended environment and command line arguments."""
if ctx.options.disable_doc and ctx.options.enable_doc:
ctx.fatal('--disable-doc and --enable-doc conflict.')
if ctx.options.disable_manpage and ctx.options.enable_manpage:
@@ -128,7 +127,7 @@ def configure(ctx):
def build(ctx):
- 'Set processor noise level and set HTML pages to build.'
+ """Set processor noise level and set HTML pages to build."""
from waflib.Logs import verbose # pylint: disable=import-error
if verbose > 1: # Pass verbosity to AsciiDoc toolchain
if ctx.env.ARGS_DOC:
@@ -140,7 +139,8 @@ def build(ctx):
class html(Task.Task):
- 'Define HTML build process.'
+
+ """Define HTML build process."""
# Optional weight to tune the priority for task instances.
# The higher, the earlier. The weight only applies to single task objects.
weight = 3 # set arbitrarily high to be first as to not slow down later tasks
@@ -149,14 +149,15 @@ class html(Task.Task):
class man(Task.Task):
- 'Define manpage build process.'
+
+ """Define manpage build process."""
weight = 2 # set arbitrarily high to be second as to not slow down later tasks (Failed)
run_str = '${ARGS_MAN} ${SRC[0].abspath()}'
@extension('.adoc')
def run_html(self, node):
- 'Add HTML build caller function.'
+ """Add HTML build caller function."""
out = node.change_ext('.html')
tsk = self.create_task('html', node, [out])
tsk.cwd = node.parent.get_bld().abspath()
@@ -164,7 +165,7 @@ def run_html(self, node):
@extension('.man-tmp')
def run_manpage(self, node):
- 'Add manpage build caller function.'
+ """Add manpage build caller function."""
n_file = node.path_from(self.bld.bldnode)
out = '%s.%s' % (n_file.replace('-man.adoc.man-tmp', ''), self.section)
out_n = self.bld.path.find_or_declare(out)
=====================================
wafhelpers/check_sizeof.py
=====================================
@@ -10,32 +10,6 @@ int main(void) {
}
"""
-
-def check_sizeof_host(ctx, header, sizeof, mandatory=True):
- sizeof_ns = sizeof.replace(" ", "_")
- name = "NTP_SIZEOF_%s" % sizeof_ns.upper()
-
- header_snippet = ""
- if header:
- ctx.start_msg("Checking sizeof %s (%s)" % (sizeof, header))
- header_snippet = "#include <%s>" % header
- else:
- ctx.start_msg("Checking sizeof %s" % (sizeof))
-
- ctx.check_cc(
- fragment=SIZE_FRAG % (header_snippet, sizeof),
- define_name=name,
- execute=True,
- define_ret=True,
- quote=False,
- mandatory=mandatory,
- comment="Size of %s from <%s>" % (sizeof, header)
- )
- ctx.end_msg(ctx.get_define(name))
-
-
-# Cross compile check. Much slower so we do not run it all the time.
-
SIZE_FRAG_CROSS = """
%s
#include <sys/stat.h>
@@ -47,19 +21,8 @@ int main(void) {
"""
-def check_sizeof_cross(ctx, header, sizeof, mandatory=True):
- sizeof_ns = sizeof.replace(" ", "_")
- name = "NTP_SIZEOF_%s" % sizeof_ns.upper()
-
- header_snippet = ""
- if header:
- ctx.start_msg("Checking sizeof %s (%s)" % (sizeof, header))
- header_snippet = "#include <%s>" % header
- else:
- ctx.start_msg("Checking sizeof %s" % (sizeof))
-
+def check_sizeof_c(ctx, header, header_snippet, sizeof, name, mandatory=True):
for size in range(2, 13):
-
try:
ctx.check_cc(
fragment=SIZE_FRAG_CROSS % (header_snippet, sizeof, size),
@@ -73,13 +36,38 @@ def check_sizeof_cross(ctx, header, sizeof, mandatory=True):
return
except Errors.ConfigurationError:
pass
-
+ ctx.end_msg('Error')
raise # never reached.
+def check_sizeof_n(ctx, header, header_snippet, sizeof, name, mandatory=True):
+ ctx.check_cc(
+ fragment=SIZE_FRAG % (header_snippet, sizeof),
+ define_name=name,
+ execute=True,
+ define_ret=True,
+ quote=False,
+ mandatory=mandatory,
+ comment="Size of %s from <%s>" % (sizeof, header)
+ )
+ ctx.end_msg(ctx.get_define(name))
+
+
@conf
-def check_sizeof(*kwargs):
- if kwargs[0].env.ENABLE_CROSS:
- check_sizeof_cross(*kwargs)
+def check_sizeof(ctx, header, sizeof):
+ """Check and return the length of a type.
+
+ The cross compile check is O(n) slower so we do not run it all the time.
+ """
+ sizeof_ns = sizeof.replace(" ", "_")
+ name = "NTP_SIZEOF_%s" % sizeof_ns.upper()
+
+ header_snippet = ""
+ if header:
+ ctx.start_msg("Checking sizeof %s (%s)" % (sizeof, header))
+ header_snippet = "#include <%s>" % header
else:
- check_sizeof_host(*kwargs)
+ ctx.start_msg("Checking sizeof %s" % (sizeof))
+
+ cb = check_sizeof_c if ctx.env.ENABLE_CROSS else check_sizeof_n
+ cb(ctx, header, header_snippet, sizeof, name, mandatory=True)
=====================================
wafhelpers/options.py
=====================================
@@ -1,10 +1,12 @@
def options_cmd(ctx, config):
+ """Add most options for NTPsec to optparse derivative."""
ctx.load("compiler_c")
ctx.load("msvc")
ctx.load('waf_unit_test')
ctx.load('gnu_dirs')
- def callback_flags(option, opt, value, parser):
+ def callback_flags(option, opt, value, _):
+ """Store some command line options into config."""
config["OPT_STORE"].setdefault(opt, []).append(value)
grp = ctx.add_option_group("NTP configure options")
@@ -35,7 +37,7 @@ def options_cmd(ctx, config):
grp = ctx.add_option_group("NTP cross compile options")
grp.add_option('--cross-compiler', type='string',
help="Path to cross compiler CC. (enables cross-compiling)")
- grp.add_option('--cross-cflags', type='string', action="callback",
+ grp.add_option('--cross-cflags', type='string', action="callback",
callback=callback_flags, help="Cross compiler CFLAGS.")
grp.add_option('--cross-ldflags', type='string', action="callback",
callback=callback_flags, help="Cross compiler LDFLAGS.")
View it on GitLab: https://gitlab.com/NTPsec/ntpsec/-/commit/663353b37a169addbc1f19c1522b6124837b672f
--
View it on GitLab: https://gitlab.com/NTPsec/ntpsec/-/commit/663353b37a169addbc1f19c1522b6124837b672f
You're receiving this email because of your account on gitlab.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ntpsec.org/pipermail/vc/attachments/20200914/c70a1e49/attachment-0001.htm>
More information about the vc
mailing list