[Git][NTPsec/ntpsec][master] Address GitLab issue #237: documentation refclock pps missing unit description
Eric S. Raymond
gitlab at mg.gitlab.com
Mon Aug 21 12:04:47 UTC 2017
Eric S. Raymond pushed to branch master at NTPsec / ntpsec
Commits:
9a6fe129 by Eric S. Raymond at 2017-08-21T08:04:13-04:00
Address GitLab issue #237: documentation refclock pps missing unit description
- - - - -
15 changed files:
- docs/driver_arbiter.txt
- docs/driver_generic.txt
- docs/driver_gpsd.txt
- docs/driver_hpgps.txt
- docs/driver_jjy.txt
- docs/driver_local.txt
- docs/driver_magnavox.txt
- docs/driver_modem.txt
- docs/driver_nmea.txt
- docs/driver_oncore.txt
- docs/driver_pps.txt
- docs/driver_shm.txt
- docs/driver_spectracom.txt
- docs/driver_truetime.txt
- docs/driver_zyfer.txt
Changes:
=====================================
docs/driver_arbiter.txt
=====================================
--- a/docs/driver_arbiter.txt
+++ b/docs/driver_arbiter.txt
@@ -99,6 +99,9 @@ over the last 16 seconds.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_generic.txt
=====================================
--- a/docs/driver_generic.txt
+++ b/docs/driver_generic.txt
@@ -433,6 +433,9 @@ screen width and looks similar to:
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ _time_ ::
Specifies the time offset calibration factor, in seconds and fraction.
The default value depends on the clock type.
=====================================
docs/driver_gpsd.txt
=====================================
--- a/docs/driver_gpsd.txt
+++ b/docs/driver_gpsd.txt
@@ -194,6 +194,9 @@ since the last poll.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the PPS time offset calibration factor, in seconds and
fraction, with default 0.0.
=====================================
docs/driver_hpgps.txt
=====================================
--- a/docs/driver_hpgps.txt
+++ b/docs/driver_hpgps.txt
@@ -67,6 +67,9 @@ http://www.symmetricom.com/[Symmetricom].
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_jjy.txt
=====================================
--- a/docs/driver_jjy.txt
+++ b/docs/driver_jjy.txt
@@ -363,6 +363,9 @@ filegen clockstats file clockstats type day enable
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_local.txt
=====================================
--- a/docs/driver_local.txt
+++ b/docs/driver_local.txt
@@ -37,6 +37,8 @@ No +filegen clockstats+ monitor data are produced by this driver.
== Driver Options ==
++unit+ 'number'::
+ Not used by this driver.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_magnavox.txt
=====================================
--- a/docs/driver_magnavox.txt
+++ b/docs/driver_magnavox.txt
@@ -53,6 +53,9 @@ Format].
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_modem.txt
=====================================
--- a/docs/driver_modem.txt
+++ b/docs/driver_modem.txt
@@ -132,6 +132,9 @@ with the Hayes connection and hang-up commands and result codes.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_nmea.txt
=====================================
--- a/docs/driver_nmea.txt
+++ b/docs/driver_nmea.txt
@@ -217,6 +217,9 @@ switched on by sending the following string.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the PPS time offset calibration factor, in seconds and
fraction, with default 0.0.
=====================================
docs/driver_oncore.txt
=====================================
--- a/docs/driver_oncore.txt
+++ b/docs/driver_oncore.txt
@@ -64,6 +64,9 @@ specific receiver in use will be required.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_pps.txt
=====================================
--- a/docs/driver_pps.txt
+++ b/docs/driver_pps.txt
@@ -90,6 +90,9 @@ synchronization without needing the Internet at all.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_shm.txt
=====================================
--- a/docs/driver_shm.txt
+++ b/docs/driver_shm.txt
@@ -154,6 +154,9 @@ for the specific unit.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the IPC unit name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
=====================================
docs/driver_spectracom.txt
=====================================
--- a/docs/driver_spectracom.txt
+++ b/docs/driver_spectracom.txt
@@ -85,6 +85,9 @@ received.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the PPS time offset calibration factor, in seconds and
fraction, with default 0.0.
=====================================
docs/driver_truetime.txt
=====================================
--- a/docs/driver_truetime.txt
+++ b/docs/driver_truetime.txt
@@ -101,6 +101,9 @@ written as-is to the +clockstats+ file.
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
to be used for the West satellite, with default 0.0.
=====================================
docs/driver_zyfer.txt
=====================================
--- a/docs/driver_zyfer.txt
+++ b/docs/driver_zyfer.txt
@@ -25,6 +25,9 @@ link:refclock.html[Reference Clock Drivers]
== Driver Options ==
++unit+ 'number'::
+ The driver unit number, defaulting to 0. Used as a distinguishing
+ suffix in the driver device name.
+time1+ 'time'::
Not used by this driver.
+time2+ 'time'::
View it on GitLab: https://gitlab.com/NTPsec/ntpsec/commit/9a6fe129434ebca230d6da7bc228debb2180733d
---
View it on GitLab: https://gitlab.com/NTPsec/ntpsec/commit/9a6fe129434ebca230d6da7bc228debb2180733d
You're receiving this email because of your account on gitlab.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ntpsec.org/pipermail/vc/attachments/20170821/cc639bb6/attachment.html>
More information about the vc
mailing list