'MODE_BROADCASTx'

[Gary E. Miller]

Yo Hal!

On Wed, 12 Aug 2020 13:03:01 -0700
Hal Murray <hmurray at megapathdsl.net> wrote:

> > You can see I have the new one installed:  
> 
> Then either the new one is buggy or you aren't using it at runtime.

Which does not narrow it down much.

> magic.py is made by a script.  It just copies the right chunks from
> ntp.h and changes #define xx yy to xx = yy.  (or something close to
> that)  You can easily check to see if your magic.py has
> MODE_BROADCASTx or the old MODE_BROADCAST (without the x).

It had the old one:

build/main/ntpclients/ntp/magic.py:MODE_BROADCAST	= 5	# broadcast mode 
> Did you do a clean build after git pull?

    ./waf clean
    ./waf configure --refclock=all && ./waf build  &&./waf install

>  If not, then maybe waf
> wasn't smart to rebuild magic.py

Maybe so.

I did a complete "rm -R ntpsec" and git clone.  Which I thought I had done
already, and now it works.  So maybe the c;ean is a problem?  My previous
file times would also indicate that.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
	gem at rellim.com  Tel:+1 541 382 8588

	    Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 851 bytes
Desc: OpenPGP digital signature
URL: <https://lists.ntpsec.org/pipermail/devel/attachments/20200812/c0b13693/attachment.bin>