1.1.6 build fails on FC30

[Udo van den Heuvel]

On 03-11-2019 12:06, Hal Murray wrote:
> 
>> We do see pps and nmea but ntpd does not choose the local gps. Why?
> 
> How do you "see" them?

I use `ntpq -pn` to see what the status is.


>> NMEA(0)      .GPS.    0 l    8   64  377   0.0000   0.0000   0.0019
> 
> I don't understand what's going on.  The 377 says it is working, but the 
> 0.0000 and 0.0019 say that it isn't working.
> 
> Do you have the baud rate correct?

Yes.
`cat /dev/gps0` shows the NEMA stream.

> What is in clockstats?

We have clocklist:

ntpq> clocklist
associd=0 status=0012 1 event, clk_bad_format,
name="NMEA",
timecode="$GPGGA,111253,5150.2223,N,00457.3970,E,1,08,1.0,-106.4,M,45.5,M,,*6F",
poll=14, noreply=0, badformat=1, baddata=0, fudgetime1=0.0,
fudgetime2=260.0, stratum=0, refid=GPS, flags=5, device="NMEA GPS Clock"


Then the 'badformat' is worrying.
What is wrong and how can I fix this?

Also: when the GPS gives bad data, then why doesn't it use a different
clock as peer?


Udo