[ntp:hackers] u-blox reference clock driver

[Achim Gratz]

Gary E. Miller via devel writes:
> CAre to be more specific on which u-blox support EXTINT0?

All of them, literally.

> Been there, done that, many variants not in your reference.

This is the documentation for the uBlox-8 modules (the little
rectangular bugger with the uBlox sticker on top), not for any boards or
gizmos that use those.  AMong other things it tells you how to ask any
of these for their configuration, which includes the firmware version.

Whether or not the EXTINTx is usable on any particular board that uses
the module you will have to find out via the board manufacturers
documentation.  However, it's not hard to find out even without that
info when it's right there on the silkscreen.

> Rather than talk about it, can you set one up and show us the data?

You said you have an M8T.  I don't.  You have the sources to the forked
NTP classic.  You have the patches for the kernel (only one actually,
the other is for FreeBSD).


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

SD adaptations for KORG EX-800 and Poly-800MkII V0.9:
http://Synth.Stromeko.net/Downloads.html#KorgSDada