HOWTO: a little good news, ntpq output

[MIKE MAJOR]

All I can say is this is pretty cool for around $100!! 

Here is some of the first ntpq -p output. The formatting is not the best but you get the idea. 

pi at raspberrypi:~ $ ./ntpsec/build/main/ntpclients/ntpq -p
     remote           refid      st t when poll reach   delay   offset   jitter
===============================================================================
*SHM(1)                 .PPS.               0 l    5   64   37   0.0000  -0.8453   0.5385
xSHM(0)                .GPS.               0 l   56   64   37   0.0000 -511.405  19.0390
 us.pool.ntp.org      .POOL.             16 p    -  256    0   0.0000   0.0000   0.0019
-four10.gac.edu     128.138.141.172  2 u   52   64   37  60.1225  -1.2918   0.6821
-23-95-116-98-ho     23.31.21.163     3 u   53   64   37  54.3820  -0.5212   0.9986
-soft-sea-01.ser      209.51.161.238   2 u   56   64   37  90.1554  -2.9324   0.7769
-mdnworldwide.co    127.67.113.92    2 u   56   64   37  58.8871  -3.6338   1.6992
-ha81.smatwebdes 216.218.192.202  2 u    -   64    3  46.5872  -0.1944   0.4904
+clock.trit.net          192.12.19.20     2 u    -   64    3  70.2648   0.1491   0.6211
+y.ns.gin.ntt.ne      249.224.99.213   2 u   57   64    1  25.8967  -1.1399   0.8738
 138.197.234.185     127.67.113.92    2 u   67   64    1  88.6408   0.4413   0.0000
I think I'll leave it running overnight. 

Until tomorrow, 
Mike Major
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ntpsec.org/pipermail/devel/attachments/20180809/8f824f83/attachment.html>