seccomp on Raspberry Pi

[Gary E. Miller]

Yo Hal!

On Mon, 15 May 2017 16:39:01 -0700
Hal Murray <hmurray at megapathdsl.net> wrote:

> > Works fine on Gentoo, but I have not tested much.  
> 
> Is it actually working, or just didn't crash?

I assume the former from the later.  Any tests I should run?

> The only way I know to tell is to find the startup messages.

So this is good"

05-15T15:47:31 ntpd[22327]: sandbox: seccomp_init() succeeded
05-15T15:47:31 ntpd[22327]: sandbox: seccomp_load() succeeded


> If you have --enable-early-droproot, they happen before the log file
> is setup so they go to syslog which ends up in /var/log/syslog on
> Debian/Raspbian.

In my case they are in /var/log/ntp.log

Any other tests I should run?

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
	gem at rellim.com  Tel:+1 541 382 8588

	    Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.ntpsec.org/pipermail/devel/attachments/20170515/39d838f5/attachment.bin>