Python ntpq

[Achim Gratz]

Eric S. Raymond writes:
>> That now doesn't work like this:
>
> Fix pushed. Try again?

Almost there… where are the double double quotes coming from?  And can
the header rule be truncated to the table width, please?

pi at raspberrypi2:~/ntpsec $ ntpq/ntpq -pc "cv &1" -c "cv &2"
     remote                                   refid      st t when poll reach   delay   offset  jitter
==============================================================================================================================================================================
 "NMEA(0)"                               .uBx8.           0 l   10   16  377    0.000    1.989   3.109
o"NMEA(1)"                               .NavS.           0 l    9   16  377    0.000    0.000   0.001
 ptbtime1.ptb.de                         .PTB.            1 u   47   64  377   27.627    0.756   0.080
 ptbtime2.ptb.de                         .PTB.            1 u   56   64  377   27.095    0.767   0.108
 ptbtime3.ptb.de                         .PTB.            1 u   25   64  377   25.922   -0.122   0.195
associd=14812 status=0000 no events, clk_unspec,
device=""NMEA GPS Clock"", name=""NMEA"", timecode=""$GNZDA,124958.00,27,11,2016,00,00*7B"", poll=379, noreply=0, badformat=0, baddata=0, fudgetime2=39.6, stratum=0,
refid=uBx8, flags=0
associd=14813 status=0000 no events, clk_unspec,
device=""NMEA GPS Clock"", name=""NMEA"", timecode=""$GPZDA,124958.000,27,11,2016,00,00*55"", poll=379, noreply=0, badformat=0, baddata=0, fudgetime1=-1.69,
fudgetime2=150.0, stratum=0, refid=NavS, flags=1


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada