microserver HOWTO timeservice patch

[Mike]

On 06/08/2016 02:13 PM, Gary E. Miller wrote:
> Yo Mike!
>
> On Wed, 8 Jun 2016 11:28:51 -0400
> Mike <bellyacres at gmail.com> wrote:
>
>> Attached patch is diff from
>> http://www.catb.org/esr/faqs/stratum-1-microserver-howto/timeservice
>> this am.
>
> You just moved it around, but I object to the whole concept:
> 	
> +		# Make sure the UART device is in a good state
> +		stty -F /dev/gpsd0 raw 9600 cs8 clocal -cstopb
>
> This assumes the GPS is at 9600 baud, I usually up the speed for better
> performance, 9600 is marginal.
>
> I'd just remove the stty totally, let gpsd do its job and autobaud.
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> 	gem at rellim.com  Tel:+1 541 382 8588

Gary,

That was there to begin with, I just moved it to be before starting 
gpsd, where it should have been.

The real showstopper was -P -p for the PID files, they needed switched also.

Mike