[gpsd-dev] GR-701W hangs on Pi-3

[Eric S. Raymond]

Frank Nicholas <frank at nicholasfamilycentral.com>:
> Another quick note regarding power & the Raspberry Pi B+, 2 & 3 - the red Power LED will turn off to indicate if voltage drops below 4.63V.  The Pi MIGHT continue to function Ok, but this is a clear indication of a power issue.
> 
> It might be a good thing to point out in the HowTo that if the power LED is flickering, or not staying on solid, then the power supply or power cable is not adequate.

Excellent tip, added.
-- 
		<a href="http://www.catb.org/~esr/">Eric S. Raymond</a>