Pi HOWTO

Dan Poirot dtpoirot at gmail.com
Wed Apr 27 13:17:39 UTC 2016


...I don't see anything like it on the Adafruit site, but back when the Pi
first hit the scene and all the Real Fanboys (like me) had one, outfits were
handing out LASER-cut acrylic, press-fit cases with company Marketing logos
and URL's engraved!

So sweet... Peel off the masking paper, arrange by ports, press together,
MARVEL at your cleverness!


(Please recall that this is, in fact, the CPU board which was pasted to the
cover of a magazine in the UK!)

- dan



-----Original Message-----
From: devel [mailto:devel-bounces at ntpsec.org] On Behalf Of Hal Murray
Sent: Wednesday, April 27, 2016 7:07 AM
To: esr at thyrsus.com
Cc: devel at ntpsec.org
Subject: Re: Pi HOWTO

> Hm.  Remind me what that case us? I should out it in the draft.

https://www.adafruit.com/products/2258

You should get one to play with.  You have to put the Pi in first, then
install the HAT.  When installing the Pi, I find it easiest to use a small
screwdriver from underneath to bend the hooks out of the way.


--
These are my opinions.  I hate spam.



_______________________________________________
devel mailing list
devel at ntpsec.org
http://lists.ntpsec.org/mailman/listinfo/devel



More information about the devel mailing list